Detailed Product Description

                                        Gypsum Block Production Plants 

    Gypsum block is mainly used frame structure and other structures of the body of , and generally used as . If choose a suitable fixed and support structure, the wall may also bear a heavier load (such as hanging cabinet, water heaters, appliances of toilet etc.). The introduction of a special admixture of moisture blocks can be used in bathrooms, toilets and other places not continuing so wet.

    Forming units, in addition to the crew of "casting, hydraulic jacking" the principle of things.

building plaster accord with national standards.

    The measurement of gypsum powder is using the simple measuring equipment, water volume measurement using simple measuring instruments

    The advantages of manual or semi-mechanized equipment are low investment, quick start, obtain the economic benefits quickly, often for the general self-employed or small-scale production plant. However, due to equipment is simple and crude, resulting in labor-intensive,and poor working conditions. And arbitrary due to the production of large, difficult to control product quality, poor quality and unstable, low productivity, it is difficult to form economies of scale and other reasons, it is very difficult in the intense market competition in gaining the edge, not in line with the implementation of the country raised production industry requirements.

    Learn from the principle of top-up method, we can see that changing the moulds size we can produce gypsum block with different specifications, and increase or decrease the number of partitions (that is the number of mold cavity), or to change the quantity of the block , that has changed the production capacity of the units (of course, involves the thrust and other factors such as changes).

    Because of the finish of mold and high precision of manufacturing, there is no relative movement between partitions, the side panels. The surface of the mold is a hard chrome plated and the mirror-polished, so the size of product specifications is very accurate, very smooth surface formation. Of course, the structural design of molds is to demonstrate the advantages of top-up fully

1. The main process

   A more comprehensive vertical mold lift-up method of producing gypsum block production lines,

   At first the calcining natural gypsum or chemical gypsum powder are pumped to the clinker storage by the pneumatic pump pumping or bucket elevator, such as silo with cleaning facilities, auto-level device and the sender's arch-breaking devices and so on, and then feed into the transmission equipment. After the measurement of the electron scales they will go through pneumatic discharge valve into the mixer. The producing water also come into the mixer through the pneumatic discharge valve after measuring. If necessary, add some coagulant in the mixer.

   In the mixer through the blender so that the strong mixing uniform mixture of components, slurry will be poured by hydraulic automatic into the molding machines every cavity. At a suitable stage of Slurry solidification, driving mounted on the top of the hydraulic cavity molding scraper, make it to-and-fro movement to scraped off the upper level population of the block.    And the driven jacking systems on the central hydraulic station push out the block from the mould. At this point the pneumatic telescopic fixture at the top of the molding machine will caught, promotion, removal the block, and then automatically open a certain distance between the block to meet the drying process request, on the stack frame or a small car. Mounted on a forklift truck by a mechanical fixture on the whole block scheduling, transported to the site dry in naturally, or pile into the car to block the tunnel kiln drying manual. If the gypsum block after drying is qualified, you can transport, packaging products for storage or outbound logistics.

2. The main production equipment

Industrial production of gypsum block unit

(1) 15 semi-automatic units gypsum block X100

(2) 15 gypsum block X100 main technical parameters

Product specifications: 500X600X100mm, with the prices around the mouth of 1m  ^with the equivalent to a solid block (after the addition of attachment can produce hollow block).

Product Quality: meet or exceed the building materials industry "gypsum block" standards.

capacity: 16 ~ 180,000

molding cavity number: 15

expected push-out period: 6 to 7 times (depending on factors such as condensation time)

Plaster of paris powder : ~ 2t / h

 water : ~ 1.6t / h in line with standard tap water, water pressure 0.3 ~ 0.5MPa

installed power: ~ 20Kw

  Pit Size: 3mx3.6mx2.6m