Detailed Product Description

Building gypsum is the main raw material of gypsum block, adding water, mixing, pouring and molding and drying lightweight building block. Gypsum brick shape for one flat rectangular, generally vertical and horizontal edges, respectively, with mortise and slot. Gypsum block can be divided into two categories: solid and hollow block, because the finish of the  mold 600 * 500 * 100 (120) and the high  precision manufacture, when we use the side there is no relative movement, combined with the surface of die are hard chrome plated and the mirror-polished, plated and the mirror-polished, therefore, the product sizes are very accurate, the surface is very smooth. Of course, the structure design must be fully demonstrated the merit that the model is equivalent to rising immediately.    

Main processing flow:

First the pneumatic pump or the hoister send the plaster of paris or the chemical gypsum powder into linker warehouse. Silo with cleaning facilities, automatic level device and the sender's arch-breaking devices, etc., and then entering into the transmission and feed devices. After the proportioning system of electronic metering device metering through pneumatic discharge valve into the mixer. The production of water also into mixer after the proportioning system of water metering device debugging. If required, adding proper coagulant into the mixer.

In the mixer through the strong mixing blender to make the various parts mixed evenly , the inversed hydraulic device will automatically pour the slurry into all mold cavity of the molding machine. At appropriate stages of the slurrys solidification, the drive installed in the mold cavity forming the top of the hydraulic scraper to and from the exercise, were scraped off the block to the upper level of the tenon. At the jacking systems of the central hydraulic station of the  driven molding machine get the entire row of gypsum block out from the mold top. At this point, the pneumatic telescopic fixture which located at the top of the molding machine pneumatic will seize entire row of blocks, hoists, removal, and then automatically put each at a certain distance, to meet the drying process request, after drying ,put them on the stack frame or trolley.